Texas Superior Animal Waterer w/ High Pressure Float Heated

• 13" Wide x 7" High x 8" Deep
• Holds approx. 1 gallon of water
• Stainless steel removable float cover
•  1" drain on the bottom of the waterer
• High Pressure Float Valve Assembly
• Rated at 145 psi
• Heater Pad pre-mounted on the underside
• Heater Specs: 100-watt, 110-volt silicone pad heater
• 16100HPH

This heater pad is equipped with 3M brand self-adhesive and is mounted and sealed with silicone on the bottom of the waterer unit. It comes complete with a temperature control thermostat. The heater pad is designed to maintain a temperature of approximately 55° F. In a recent test with an ambient temperature of 15° F, the heating cycle was approximately 7 minutes. This heater is durable and long lasting.The 1" drain on the bottom of the waterer unit allows for rapid evacuation of water, creating a vortex of water that will pull debris down the drain with it, and helps make cleaning the unit as easy as possible.The High Pressure Float Valve Assembly is an optional feature for use with Texas Superior Animal Waterer®. It comes with a custom mounting bracket that can be attached to the Texas Superior Animal Waterer® without any other fastenings needed, replacing the standard float valve it typically comes with. Also included in the assembly, and pre-installed, are the brass fittings needed to attach the High Pressure Float Valve to our fitting kits or your water supply.The High Pressure Float Valve included in this assembly is rated up to 145 PSI, over 4X higher than that of the standard float that the Texas Superior Animal Waterer® normally comes with. The standard float is recommended for use in water systems with a pressure no greater than 35 PSI.